Power Extending Large Current MOS Heat Dissipation Module

Power Extending Large Current MOS Heat Dissipation Module

Product Code:qX6tgnYr
Availability:In Stock
  • US $5.11

  • Ex Tax: US $5.11


Main Features:
● Work with Anet A8 3D printer heat bed
● Completely solve the issue that the power of hot bed is too large and the load current
● Under the premise of normal cooling, it works stable under I ( max ) = 25A, the current must not exceed 25A in working process
● General add-on heated bed power expansion module
● Note: the wire's color is random

Summary:
● Remove basically all outside screws for your Anet A8 control box
● Take pictures of existing board wiring
● Unscrew two large 12 / 14GA wires on the board labeled HOT BED
● Screw these two wires into the new MOSFET board labeled HOT BED
● Connect the small jumper wires ( white ) to the control board where you just remove the two wires and screw them down. Note the polarity on each board. Match ( + ) to ( + ) and ( - ) to ( - )
● Find 2 x 6 - 8 inches pieces of 12 or 14 AWG wire
● Run one of the 6 inches wires to the power supply ( + ), screw in. The other side to the ( + ) DC on the new MOSFET board. Repeat for the negative wire ( - ) to ( - )
● Many people use velcro to secure the new board to the top of the control box.
● Put everything back together
● When complete, you'll see a blue light activate for signal from inside the box when the bed heater is activated by the control board

Specification

General

Materials: PCB
Suitable for: Mainboard Control
Type: DIY Accessories

Weight and Size

Package size: 16.00 x 10.00 x 4.00 cm / 6.3 x 3.94 x 1.57 inches
Package weight: 0.0610 kg
Product size: 6.00 x 5.00 x 3.00 cm / 2.36 x 1.97 x 1.18 inches
Product weight: 0.0380 kg

Package Contents

Package Contents: 1 x MOS Heat Dissipation Module, 1 x Wire
Power Extending Large Current Load MOS Heat Dissipation Module for 3D Printer Mainboard- Black
Power Extending Large Current Load MOS Heat Dissipation Module for 3D Printer Mainboard- Black
Power Extending Large Current Load MOS Heat Dissipation Module for 3D Printer Mainboard- Black
Power Extending Large Current Load MOS Heat Dissipation Module for 3D Printer Mainboard- Black

Write a review

Note: HTML is not translated!
    Bad           Good